Fillamentum Nylon FX256 Sky Blue RAL 5015/Pantone 3015

>Data sheet Fillamentum Nylon FX256

> Printing Guide Nylon FX256

> Safety Data Sheet

Printing Nylon FX256:

• Working Temperature: 235 - 255°C
• Heated bed: 90 - 100°C
• Printing speed: 30 - 50 mm/sec.
• Raft/skirt/brim: Brim 10 mm/raft
• Part cooling fan: 0 %
• Bed surface: Glass/Mirror, Lockpad
• Bed adhesion: PVA Glue, Magigoo PA
• Enclosure: Recommended
• Raft/Brim: Brim of >10 mm
• Pre-dry settings: 3 hours at 80°C
• Designing Nylon parts: Avoid sharp angle/corners

Nylon or polyamide is engineering polymer with excellent mechanical properties  and better heat and chemical resistance comparing ABS or PLA material. 

Due to its characteristics can be used for printing mechanical parts.

Advantages of Fillamentum Nylon FX256:

- incredibly strong, durable and versatile 3D printing material
- flexible in thin layers, but with very high inter-layer adhesion
- low friction coefficient and high melting temperature
- less brittle and therefore stronger than PLA and ABS


Material Data:

Material density: 1.01 g.cm-3
Tensile Strenght: 45 MPa
Tensile Modulus: 1400 MPa
HDT at 0.45 MPa: 110°C