Polymaker
PolyLite™ PLA SILK Purple, 1 KG Jam Free 3D filament
€29,95
PolyLite™ SILK is shiny Purple PLA filament with Jam-Free™ technology; so no blockages!
Availability:
Out of stock
Polylite PLA has a beautiful shine, prints very easily and without interference due to the Jam Free technology
Printing Instruction & Settings
Polymaker PolyLite™ is Premium PLA produced using Jam-Free™ technology; an even extrusion ensures trouble-free production without blockages. PolyLite™ is sold per 1 kg on a spool.
Print settings:
- Nozzle temp.: 190-230°C
- Heated Bed: 25 - 60°C
- Speed: 40 - 60mm/sec.
- Cooling Fan: On
- Bed adhesion: Glass, PEI, BuildTak, 3DLAC, spray and glue
- Pre-drying: if necessary 6 hours at 55°C
Mechanical Properties:
- Young’s Modulus: 2636 ± 330 Mpa
- Tensile Strength: 46.6 ± 0.9 Mpa
- Bending Strength: 85.1 ± 2.9 Mpa
- Charpy Impact Strength: 2.7 ± 0.2 kJ/m2
Thermal properties:
- Glass Transition Temperature: 61˚C
- Vicat Softening Temperature: 63˚C
- Melting Temperature: 150˚C
PolyLite™ PLA features Jam-Free™ technology:
Jam-Free™ technology improves the heat stability of Polymaker’s PLA filaments with softening temperatures over 140 °C. As a result, Polymaker’s PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.
No reviews found...
Also bought by other people
